How to change your wheels bearings?
How to change your wheel bearings. Remove the disc and the dust cover from the hub.
Tools : Cone spanner / 17 mm spanner / Grease / Mallet
Step 1
While holding the axle firmly, unscrew the toothed washer with the specific tool.
Step 2
Remove the cover by hand, then turn the rim to see the other side.
Step 3
Remove the hub axle.
Step 4
Then screw the cassette onto the body using a standard cassette tool.
Step 5
Grease the hub body at the bearing seats.
Step 6
To install the new bearings, use a socket slightly smaller than the diameter and tap gently so that they fit correctly.
Step 7
Replace the shaft and then the cover, tightening with the tool provided.
Step 8
Replace the axle cups.
