The
Stages Power R crank arm mounted power sensor from
Stages Cycling is compatible with all frames that fit Shimano Hollowtech II cranks. Stages sensors are precision instruments hand-assembled in the brand's Boulder, Colorado factory to exacting standards. They are high-resolution Stages Gen 3 electronics with enhanced signal strength for reliable and consistent data capture and transfer. ANT+ and Bluetooth technologies make it compatible with virtually any GPS, phone or smart home trainer.
Stages Power R for increased compatibility or upgrading an existing Stages Power L meter to Stages Power LR
Although not widely available, some key bike models are not compatible with the Stages Power L crank due to interference with the power meter housing, such as
Cervelo's P5 and many bikes with chain stay mounted brake calipers. Stages Power R offers increased compatibility with these models as well as the ability to upgrade existing Stages Power L meters to the Stages Power LR bilateral (dual) meter systems.
Product highlights
- Tour de France tested : Stages Power has led riders to three consecutive Tour de France victories and many other world and national championships. If you think racing provides the best testing ground in the world, then Stages Power is the best power meter in the world.
- Active Temperature Compensation (ATC) as standard equipment: Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings regardless of environmental conditions. ATC is the main reason a rider can trust Stages Power's data in any condition.
- Individual Meter Calibration for More Accurate Results : Each Stages Power sensor is individually calibrated to ensure an accuracy level of +/- 1.5%, which is the best accuracy level in the industry for non-scientific sensors.
Details
- Weight: Adds only 20g to the weight of the base crankset.
- Accuracy: +/- 1.5% accuracy in all conditions.
- Sensor housing: Low profile version, with rugged door interface. Tool-free battery replacement on the left arm
- Battery life: 200+ hours (Stages Power R, via button cell: CR2032).
- Power range: 0 - 2500 Watts.
- Speed range: 20 - 220 rpm.
- Waterproofing: IPX7.
- Number of teeth: 54-40.
- Compatible: 12 speeds.
- Crank lengths: 160 / 165 / 170 / 172.5 / 175 mm
In the box
- Sensor on the right crank.
- Shimano chainrings.
- 1xHigh quality CR2032 battery.
- Lifetime access to "Stages Link" service for sensor management and firmware update.
- 2 months free access to the " Stages Link Premium " (training and coaching).
- Product identification card with serial number and ANT+ ID number.
- Instructions for use
Features
- Active temperature compensation.
- Measurement of the cadence by accelerometer or possibility of using a Hall effect system with magnet.
- Wireless firmware update.
- LED indicator for visual display of battery charge level.
- Updated accelerometer and added gyroscope for better cadence resolution.
- NFC technology to pair certain phones/devices.
- Enhanced BLE (Bluetooth Low Energy) and ANT+ radio links offer a 6x improvement in data transmission power.
Compatibilities
- Compatible with all Shimano Hollowtech II road cranks (left side).
- Compatible with most frames (see the adjustment guide in the "Support" section of the manufacturer's website).
- Compatible with Stages Link, Training Peaks, Strava, Garmin Training Center and many others...
- Compatible with ANT+ and Bluetooth Smart Ready devices.
MORE INFORMATION