The Fox 38 fork is the body-built version of its little sister Fox 36, the benchmark model in Enduro, but optimized for 160 to 180 mm travel.
The forks feature a number of innovations: bleeders to balance the fork's internal and external pressures, air/oil ramps for better air pressure management, optimized lubrication of the upper seals, a new hoop for even greater rigidity, and a floating axle system to ensure perfect alignment between fork and hub.
The tee-pivot-plunger assembly has also been optimized by the brand, with the fork featuring an oblong tapered pivot with a differentiated internal diameter, a tee whose diameter has been increased to 58 mm, and 38 mm plungers.
As you
can see, the Fox 38's rigidity will not disappoint.
On the spring side, the Fox 38 uses the brand's trademark Float air system, but with a few improvements to increase progressiveness and reduce friction
Details :
- Size: 29''
- 1''1/8-1.5'' tapered pivot
- Axle: Boost 15x110 mm(Kabolt)
- Hydraulics: Grip 3Pos cartridge
- Spring: Air Float
- Offset: 44 mm
- Adjustments: preload, high and low speed rebound.
- Plungers: 38 mm
Supplied with :
References :
- 910-21-021 / 38 Float 29" Performance 170 Grip 3Pos matte black 15QRx110 Boost Kabolt tapered offset 44mm 2022
Float damping :
The Float air shock developed for the 32, 34 and 40 forks is lighter and reduces the force required to trigger. It offers excellent sensitivity over small bumps, whatever the rider and whatever the pressure setting.
Similar to our Float shocks, the new Float system features self-balancing negative and positive chambers. This provides the right pressure for every rider. The progressiveness of the damping curve is adjustable by means of air volume spacers, so mountain bikers can fine-tune the air shock's behavior.
MORE INFORMATION