Universal Enduro Bearings 626 LLB (ABEC 3) 6 x 19 x 6mm Enduro Bearings

This radial bearing has been used as a pedal bearing and pivot bearing on some full suspension designs, although the MAX type version of this bearing is better suited for pivot applications. This ABEC-3 bearing features 52100 high carbon chromium alloy rings combined with grade 10 balls and double lip labyrinth seals (LLB) to withstand outside elements and to contain the Mobil XHP 222 90% waterproof high pressure synthetic grease. The Enduro bearing range is available in high carbon chromed steel, 440C stainless steel, in ceramic-hybrid and XD15 with ceramic or stainless steel balls. Our bearings are always designed with the deepest possible channels to accommodate the largest balls and have double-lip joints that roll into a micro-groove creating a complete labyrinth to provide long life and superior protection against the elements.

Main features :

• Versatility of use: used in certain pedals and suspension pivots (fully compatible with many MTB configurations).
• Robust material: 52100 chromium steel rings with high carbon content, ensuring excellent mechanical resistance and wear.
• ABEC-3 manufacturing quality: precise tolerances, ideal for smooth and reliable rotation in intensive use.
• Grade 10 balls: high sphericity for consistent and durable performance.
• Double-lipped LLB seals: labyrinth design for enhanced waterproofing against water, mud and dust.
• 90% Mobil XHP 222 grease filling: high pressure, moisture and heat resistant synthetic grease.
• Deep chutes: allow the use of larger diameter balls, improving load capacity and service life.
• Extended life: design designed to maximize protection from the elements and limit maintenance.
• Range varied according to the needs: available in several materials (chromed steel, stainless steel 440C, hybrid ceramic, XD15), with possible choice according to the requirements of resistance, fluidity or weight.

Features  :

• Dimensions: 6 x 19 x 6 mm.
• Type: Radial ball bearing, ABEC-3 standard.
• Ring material: High carbon chromium steel 52100.
• Balls: Chromium steel, grade 10.
• Seals: Double rubber lip (LLB) with light contact and labyrinth seal for reinforced sealing.
• Grease: 90% filling of synthetic Mobil XHP 222 grease, high pressure and water resistant.
• Weight: Approximately 7.5 g.
• Static load: Approximately 0.89 kN (200 lbf).
• Applications: Pedal bearings, suspension pivots, hubs, bottom brackets.
• Compatibility: Standard format 6x19x6 mm, widely used in mountain biking and road cycling.

MORE INFORMATION