SRAM Tool Pivot Lever LEVEL TLM/TL
Maintenance tool Sram for pivot brake lever , LORs of usable not complete dismantling of the lever for a change of room Like not spring for example.
- Insert the pin on the tool SRAM MAINTENANCE FOR PIVOT LEVER DIJ through the sleeves of the body of the lever, the spring lever and the ring of the spring.
- Push the tab of the pivot through the lever body so that it is flush with each side of the lever body.
- Remove the tool to the pin of the pivot.
- Place the lever body on the edge of a table so that ia key pivot either in vacuum, facing down , and insert the SRAM maintenance tool to lever pivot in the slot of the wedge pivot.
- Using a plastic mallet , tap the key pivot until it is completely the lever body.
Read the instructions