Here is the Fox 32 Factory SC, the one used by international pilots it represents the top of the range Fox 32. In this version it offers a new cartridge '' FIT4 '' equipped with a floating piston and a spring with two compression modes: open / close.
But the evolution comes mainly from the '' SC '' construction. This Step-Cast process is not only aesthetic, with this volume reduction, it saves weight, room for the disc and spokes and the use of tires up to 2.3 section.
Size: 29 ''
Factory: Kashima coating
Conical pivot 1''1 / 8-1.5 ''
Axis: Boost 15x110 mm Kabolt (black)
Aluminum series 7000
Hydraulics: Fit4 Cartridge
Spring: Air Float
Settings: 2 positions
Divers: 32 mm
Imagined by Geoff Kabush as part of the RAD program, the Kabolt is now available from the series.
40 grams lighter than the Fox quick-release axle (54% less weight)
Installation with a 6 mm hexagonal wrench
Ch ssis 32 Step-Cast
The particular shape of the lower part is not only aesthetic. The narrow position of the 32 Step-Cast (SC) chassis saves weight and the tag design gives room for the brake spokes and rotor. The 32 SC frame, equipped with 32 mm top tubes, has a high ring overlap for quality control; the lower arms allow you to gain even more weight.
As the fourth generation, our patented FIT4 (FOX Isolated Technology) sealed cartridge system allows three instantaneous positions for compression damping (open, medium and firm) to suit the different conditions encountered on the trails. . The Factory Series forks also feature 22 clicks of low-speed compression adjustment in open mode to allow vistors to adjust damping with great precision.
The FIT4 cartridge has been redesigned using the HSC / LSC model, pl biscit e many times, to improve damping whatever the fork. This year, the FIT4 shock absorber is equipped with a new adjustment that offers greater sensitivity while maintaining support.
The FLOAT pneumatic damper developed for the forks 32, 34 and 40 is lighter and reduces the force required for tripping. It offers excellent sensitivity on small bumps, whatever the pressure and pressure setting.
Similar to our FLOAT dampers, the new FLOAT system offers positive and negative rooms that balance automatically. This provides appropriate pressure for each individual. The progressivit of the damping curve is adjustable by means of spacers for the volume of air so that the vtists adjust with precision the behavior of the pneumatic damper.